-
1 × $10.209,00
-
1 × $0,00
-
1 × $8.113,00
-
1 × $615,00
-
1 × $1.479,00
-
1 × $227,00
-
1 × $8.054,00
-
1 × $3.642,00
-
1 × $5.301,00
-
1 × $1.099,00
-
1 × $1.279,00
-
1 × $863,00
-
1 × $97,00
-
1 × $1.932,00
-
1 × $2.223,00
-
1 × $1.445,00
-
1 × $205,00
-
1 × $3.146,00
-
1 × $0,00
-
1 × $812,00
-
1 × $176,00
-
1 × $6.301,00
-
1 × $338,00
-
1 × $495,00
-
1 × $4.728,00
-
1 × $3.164,00
-
1 × $1.479,00
-
1 × $485,00
-
1 × $186,00
-
1 × $278,00
-
1 × $979,00
-
1 × $872,00
-
1 × $1.479,00
-
1 × $1.479,00
-
1 × $774,00
-
1 × $4.394,00
-
1 × $1.402,00
-
1 × $5.779,00
-
1 × $5.181,00
-
1 × $1.279,00
-
1 × $11.543,00
-
1 × $774,00
-
1 × $863,00
-
1 × $1.479,00
-
1 × $3.582,00
-
1 × $128,00
-
1 × $258,00
-
1 × $4.959,00
-
1 × $61,00
-
1 × $0,00
-
1 × $808,00
-
1 × $345,00
-
1 × $1.898,00
-
1 × $7.780,00
-
1 × $4.019,00
-
1 × $513,00
-
1 × $1.077,00
-
1 × $988,00
-
1 × $1.581,00
-
1 × $184,00
-
1 × $14.466,00
-
1 × $2.745,00
-
1 × $3.274,00
Roll over image to zoom in
Fluke Calibration 5628-20-J
$1.701,00
- Range to 660°C
- Meets all ITS-90 reMeets all ITS-90 requirements for resistance ratios
- Rtp drift <, 20mK after 500 hours at 660°C
- Strain-free sensor design by Harts SPRT engineers
- High-temp PRT, 25.5 Ohm, 305 mm (12 in)
- If youre using block calibrators, furnaces, or temperature points above normal PRT temperatures (420 °C), then these two PRTs are for you
- The 5626 is nominally 100 Ohm and the 5628 is nominally 25.5 Ohm
- Both instruments have a temperature range of -200 °C to 661 °C
- They make great working or check standards for calibration work up to the aluminum point
- Using a regular PRT at temperatures above 500°C exposes the platinum to contamination
- If the PRT is used as a reference or calibration standard, contamination is a major problem
- SPRTs, which are more expensive and delicate, can handle the higher temperatures, but with greater risk to the instrument due to shock, contamination, or mishandling
- The 5626 and 5628 are designed to reduce the contamination risk through the use of internal protection while not impairing performance
>
Each Unit Includes
- Accredited Calibration
- Complete with ITS-90 constants and a resistance-versus-temperature table
- Spade Lugs