-
1 × $25,00
-
1 × $192,00
-
1 × $641,00
-
1 × $530,00
-
1 × $407,00
-
1 × $3.078,00
-
1 × $2.556,00
-
1 × $209,00
-
1 × $555,00
-
1 × $16.270,00
-
1 × $834,00
-
1 × $78,00
-
1 × $1.744,00
-
1 × $889,00
-
1 × $9.943,00
-
1 × $235,00
-
1 × $1.168,00
-
1 × $1.714,00
-
2 × $10.517,00
-
1 × $1.283,00
-
1 × $3.727,00
-
1 × $289,00
-
1 × $1.128,00
-
1 × $50,00
-
2 × $8.892,00
-
1 × $1.008,00
-
1 × $701,00
-
1 × $3.796,00
-
1 × $393,00
-
1 × $1.740,00
-
1 × $1.708,00
-
1 × $2.501,00
-
1 × $1.102,00
-
1 × $487,00
-
1 × $1.180,00
-
1 × $1.090,00
-
2 × $2.017,00
-
1 × $2.445,00
-
1 × $98,00
-
1 × $201,00
-
1 × $770,00
-
1 × $2.001,00
-
1 × $1.299,00
-
1 × $123,00
-
1 × $11.884,00
-
1 × $0,00
-
1 × $1.637,00
Roll over image to zoom in
Compliance West HT-3500S-RF
$1.436,00
- High precision leakage current, duration and ground continuity settings.
- Allows no load setup of leakage current and test dwell times.
- Once entered, ground continuity setting, leakage current and test dwell times can be referenced on the front panel display when unit is not testing.
- Leakage currents can be set from 1-20 mA AC or 1-5 mA DC in 0.1mA increments.
- Dwell times can be set from 1-60 seconds in 1 second increments.
- Two tests with one setup. Conducts UL/CSA Ground continuity and Hipot tests with one setup, so no additional equipment is needed.
- Small and light. 9.25 wide x 4.75 high x 10 deep. 14 lbs. But rugged enough to test manufactured housing.
- Ground continuity check is defeatable for testing two-wire products.
- Easy equipment connections. Plug your equipment right into the NEMA plug on the front panel. No adapters needed!
- J2 and J3 cords allow connection of pigtail power leads.
- Simple test outcome judgement. Green lights mean pass red lights mean fail. Failing tests sound a buzzer as well.
- Ready for your UL Inspector out of the box. NIST Traceable Calibration Certificate to MIL-STD45662-A is included. Cal cert is in accordance with UL guidance.
- Operation Instructions are printed on the rear panel for easy reference.
- In-depth testing. Both true Arc Dectection and Leakage Current circuits test the product to find problems.
- RED lights and a buzzer leave no question if a failure has occurred.
- Expandable for TUV/European Agency Testing. Can be connected to our GF-30ac 25A Ground Bond Tester with optional TEST-LINK™.
- Easy shift-by-shift Function Test. Compatible with our Patented function checker, the HTT-1and HTT-1R (With 0.1 ohm Ground check Pass/Fail Setup).