-
1 × $3.078,00
-
1 × $1.718,00
-
1 × $158,00
-
1 × $115,00
-
1 × $10.003,00
-
2 × $225,00
-
1 × $76,00
-
1 × $6.229,00
-
1 × $611,00
-
1 × $752,00
-
1 × $483,00
-
1 × $278,00
-
1 × $1.488,00
-
1 × $346,00
-
1 × $2.530,00
-
1 × $124,00
-
2 × $974,00
-
1 × $11.200,00
-
1 × $62,00
-
1 × $774,00
-
1 × $332,00
-
1 × $1.077,00
-
1 × $1.667,00
-
1 × $5.814,00
-
1 × $489,00
-
1 × $2.154,00
-
1 × $1.128,00
-
1 × $67,00
-
1 × $324,00
-
1 × $5.249,00
Roll over image to zoom in
Amprobe INSP-3
$201,00
- Meter detects faulty wiring in need of repair without removing outlets cover plates, or panel covers: Faulty splices and connections, Incorrect wiring, Undersized wiring, Faulty GFCIs, Faulty or incorrectly wired AFCIs, Incorrect line voltage, Poor ground quality
- Testing efficiency relevant test data (voltage, voltage drop, hot and neutral voltage drop, voltage with load, ground impedance) is presented on a single large display to save operator time no scrolling or switching screens needed
- Verifies if wiring is tested for load carrying ability that it meets electrical code recommendations for voltage drop under load
- User selectable 0, 10,15 and 20 amps loads to verify performance of the electrical system
- Incorrect wiring or voltage drop test failure is clearly indicated by flashing screen
- Will not trip circuit breakers or blow fuses during the test
- Tests GFCI and AFCI operations
- Check ground quality for safety and ability to support sensitive electronic equipment
- Measure fault currents
- Save money and time by eliminating guess work
- NOTE: The Inspectorâ„¢ III does not check the condition of wiring insulation
- Load: Constant 0, 10, 15 or 20 AMP simulation regardless of line voltage
- Operating Voltage: 95-140 VAC /-2%, /- 2 digits
- GFI Trip: 6.0 mA nominal to trip GFI, 30 mA to trip RCD
- AFCI Trip: Up to 8, 120 AMP pulses within 1/2 second period
>
Each Unit Includes
- Power Cord
- 9V Alkaline Battery (Installed)
- Users Manual
- Carrying Case